PUR Cladding Machine with a stable overall body and sophisticated delivery system, after ex-factory carefully adjusted, the working speed can reach 20-60 m / min, its high efficiency, fast, stable operation, to achieve Domestic advanced level. Plastic scraper structure is simple, smooth plastic, easy maintenance, in the actual production process, when the PVC coating film quickly glide over the precise temperature of the plastic reaches 130 ℃ ~ 150 ℃ squeegee, there is no PVC material to absorb a large amount Thermal time, thus ensuring that the PVC coating film is not deformed, not stretched. With a stable overall fuselage and sophisticated transmission system, the wrapping machine made by Yonglei edge coating machine does not require any form of correction device when working at the speed of 20-60m / min, and the adjusted equipment is ready for production at any time , Thus saving a lot of material and time.

Technical comparison

At present, many cold glue coating machine manufacturers began to switch to hot plastic coating production, mainly because of hot rubber coating and cold plastic coating has obvious advantages, including:

High work efficiency Cold glue process determines the coating speed is generally low. The hot glue coated products do not need to store the observation, the speed is much faster than the cold glue machine, hot melt adhesive coating equipment production efficiency is cold glue equipment 3 to 5 times.

2 low labor costs. Due to speed, high efficiency, saving labor costs.

3 rubber easy to adjust. Automatic electronic control gear pump for rubber coating system so that the coating can still be accurately controlled when the changing speed and digital display per gram of glue, glue evenly, no pile of plastic, no foam, plastic effect is good, the amount of glue About 1/3 of ordinary plastic, a number of professional design makes the device easy to adjust, and easy to grasp.

4. Products than ordinary cold-coated plastic products high temperature. Adapt to extreme cold extreme heat environment of -40 to 120 degrees Celsius, ordinary glue can not be achieved.